When it comes to the safety of electrical systems, fuses are an absolute must-have. So don’t worry about the title what size fuse for 2000 watt inverter is going to be most suitable you’ll know it all in this article. To protect vital components, they block the flow of current if it ever gets too high and moves through the wire. Between the battery and the inverter, you should install a fuse. Overload, damage, and fire are prevented, saving the wire and the inverter. Different-sized fuses are needed for various inverter voltages; for example, 12V, 24V, and 48V inverters. The inverter and its wiring are protected from power surges and short circuits by the fuse link between the battery and the inverter. But often questions such as what size fuse for 3000 watt inverter is suitable? or what size fuse for 4000 watt Inverter is suitable? Strike our minds. Not to worry every query will have a solution in this article.
The most important fuse is the one protecting the connection between the battery and the inverter, where the majority of the system’s electricity will be flowing. Most inverters also have their own built-in fuse, and there may be more scattered across the system. As the PV system’s current generation can fluctuate, the fuse protecting the inverter and cable from the battery is essential.
What Size Fuse for 2000 Watt Inverter is Needed?
To connect the battery and inverter system, you’d need a 200A fuse. The inverter’s fuse performs two key functions. It is installed in the inverter to protect it from harm and to keep the wire from overheating and burning.
When the current overloads the wire, the connecting Fuse burns out and the energy flow is cut off. It prevents energy from reaching the inverter. If the current flow exceeds what the cable can handle, the fuse will blow and the system will come to a halt. You must then replace the Fuse with the new one to restore the system to normal operation. Remember that the Fuse is available in a variety of sizes and technologies. Not all fuses are created equal. Check the documentation before purchasing one for your inverter system to determine the compatible fuse for the system. Fuse is designed for a variety of applications. After learning about what size fuse for 2000 watt inverter is needed, you also learn what size fuse for 400 watt inverter is suitable.
Also See: What Can a 2000-Watt Inverter Run?
What Size Fuse for 400 Watt Inverter is Suitable?
Fuses are rated in amps, and the amp rating of the fuse you install between your battery and inverter should be at least 1.25 times the maximum amount of continuous current your inverter is capable of drawing from the battery at the lowest battery voltage, and equal to or less than the Ampacity of the wire connecting the battery and the inverter. To connect the battery and inverter system, you’d need a 40A fuse. Now you know what size fuse for 400 watt inverter is suitable. After learning about this, it’s also best to know what size fuse for 750 watt inverter is required.
What Size Fuse for 750 Watt Inverter is Required?
The following calculation is the rule of thumb for selecting the appropriate fuse size.
Formula: Constant Power Consumption = Battery Voltage×—1.25.
Incorporating a safety factor of 1.25 means that your fuse can safely take slightly more than the capacity without causing damage in a short or surge.
So, if your inverter is rated at 750W and your battery bank is 12v, the equation would be as follows:
750W/12V = 62.5 A X 1.25 = 78.125 Amp, so a 100A fuse would be recommended in for this system. This should’ve answered what size fuse for 750 watt Inverter is required.
Also Read: Can a 300 Watt Solar Panel Run a Refrigerator?
What Size Fuse for 1000 Watt Inverter is Essential?
A typical 1000W 12V inverter consumes roughly 83 continuous amps, plus the 25% safety factor, which equals 105 Amps; hence, a 150A fuse is recommended. After this, let’s see-what size fuse for 1500 watt Inverter is a good choice. With this, you have figured out what size fuse for 1000 watt Inverter is essential.
What Size Fuse for 1500 Watt Inverter is a Good Choice?
The cable connecting your battery and power inverter should contain a 175 amp fuse if your inverter is 1500 watts. The cable’s fuse should be installed on the positive wire as close to the battery as possible. Now you finally know what size fuse for 1500 watt Inverter is a good choice.
What Size Fuse for 3000 Watt Inverter is Suitable?
To power the battery and inverter, the 3000-watt inverter would require a 600A fuse. The standard inverter cannot be linked with a single cable set. One will be the cable’s positive side, while the other will be its negative side. However, some modern inverters have different configurations. As a result, before purchasing the cable, you should contact the inverter’s manufacturer. It is critical that the correct cable is connected to the inverter and battery. Different inverter sizes would have different requirements. The maximum length would be approximately 10 AWG. It is recommended that you use a shorter cable with a thicker wire. Now, let’s explore-what size fuse for 4000 watt inverter is required.
What Size Fuse for 4000 watt Inverter is Required?

The following calculation is the rule of thumb for selecting the appropriate fuse size.
Formula: Constant Power Consumption = Battery Voltage×—1.25.
Incorporating a safety factor of 1.25 means that your fuse can safely take slightly more than the capacity without causing damage in a short or surge.
So, if your inverter is rated at 4000W and your battery bank is 12v, the equation would be as follows:
4000W/12V = 333.3 A X 1.25 = 416 Amp, so a 420A /450A fuse would be recommended in for this system.
With this, we have come to the end of this article, hope you would have learned what size fuse for 2000 watt inverter is suitable. After reading this article, you won’t have any problem getting the perfect size fuse for different watt inverters.
Recommended: Cities of Innovation: Amsterdam as a Hyper-Connected City